Major National Retailer uses My-T-Soft® to bridge user interface from Windows to Linux During the transition from Industrial PCs to Touchscreen based systems, many customers used My-T-Soft Build-A-Board to layout panels that matched membrane panels, so the change-over was as seamless as possible. This reduced operator training time, and made new systems match the systems being replaced. Now that organizations are looking at Android & Linux based solutions, what's old is new again. If the new system looks and operates like the existing system, the actual users / operators will happily & readily accept the new technology roll-out. If everything operates the same way (or there are only minor changes and/or actual improvements), there essentially is no new training time required. In large scale roll-outs, and for ease of transition, these aspects are highly desirable.
One of our customers is now in this transition to a Linux based system, and are able to quickly & easily move over their custom boards & layouts from the existing Windows system to the new Linux targets. With the cross-platform capabilities of the My-T-Soft on-screen keyboards and the different OS targets available via Build-A-Board custom layouts, this is one item that can be checked off the list - just continue to use My-T-Soft!
About Innovation Management Group
Since 1995, Innovation Management Group has been the primary supplier of onscreen keyboard user interfaces and designer utilities to major corporations, manufacturers, integrators, and users worldwide. IMG's products run 24 hours a day, 7 days a week, on some of the most secure, advanced, and critical systems in the world.
The My-T-Soft® Family along with IMG's Build-A-Board Keyboard Designer offers a consistent cross-platform onscreen user interface that is fully customizable and programmable for various hardware / software platforms. It allows customers to control user input in any field or any application and maintain a higher level of security than with a traditional physical keyboard or membrane panel. The My-T-Soft product family is ideal for use in environments such as automation, field service, food and beverage, instrumentation, in-vehicle, kiosk, laboratory, logistic, medical, military, mobile, pharmaceutical, ruggedized, utility, warehousing, whiteboard, or other extremely clean, dirty, or hazardous interactive user environment.
written December 28, 2022 by Tracy Chang
Category: PR Tags: My-T-Soft; Build-A-Board; Linux; #102
My-T-Soft® updates rolled into GE Digital iFIX 6.1 My-T-Soft® has been part of the iFIX release since 2002, providing a powerful user interface tool for operators and administrators. Custom layouts, macro capabilities, and the wealth of features added over the decades cannot be matched by any other on-screen keyboard solution. With support for Windows Server, developer tools for integration available with the IMG Developer's Kit, easy customization with Build-A-Board, and customer requested features and capabilities, My-T-Soft provides a competitive advantage for the full featured SCADA/HMI solution provided by GE Digital.
Improve productivity and process control with industrial-strength SCADA and High Performance HMI - for more information see GE Digital iFIX
To review, work with, or check out the My-T-Soft 1.90 release, you can download it here
About Innovation Management Group
Since 1995, Innovation Management Group has been the primary supplier of onscreen keyboard user interfaces and designer utilities to major corporations, manufacturers, integrators, and users worldwide. IMG's products run 24 hours a day, 7 days a week, on some of the most secure, advanced, and critical systems in the world.
The My-T-Soft® Family along with IMG's Build-A-Board Keyboard Designer offers a consistent cross-platform onscreen user interface that is fully customizable and programmable for various hardware / software platforms. It allows customers to control user input in any field or any application and maintain a higher level of security than with a traditional physical keyboard or membrane panel. The My-T-Soft product family is ideal for use in environments such as automation, field service, food and beverage, instrumentation, in-vehicle, kiosk, laboratory, logistic, medical, military, mobile, pharmaceutical, ruggedized, utility, warehousing, whiteboard, or other extremely clean, dirty, or hazardous interactive user environment.
written November 28, 2022 by Tracy Chang
Category: PR Tags: My-T-Soft 1.90 Release 5; iFIX #101
Build-A-Board 2.20 Release 7 & My-T-Soft Basic 2.20 Release 12 IMG is pleased to announce that new updates to IMG's My-T-Soft® Build-A-Board and My-T-Soft® Basic are now available for download and use. The Build-A-Board 2.20 Release 7 includes updates to run-times, including My-T-Soft for Android, My-T-Soft for Linux, My-T-Soft for Windows, and various other maintenance and usability updates. Both releases include the updated IMG License Manager, which provides local storage of Build-A-Board.com account credentials, etc. For specific details on these capabilities, see the My-T-Soft 1.90 Release 5 blog post. For product information, current download, and online help just go to the Build-A-Board product page or the My-T-Soft Basic product page. For users running earlier releases of Build-A-Board, you just need to go to Help | Check for Updates... and walk through the automatic update option.
written August 26, 2022 by Kermit Komm
Category: Development Tags: My-T-Soft; My-T-Soft Basic; Build-A-Board #100
My-T-Soft for Linux 2.20 Release 16 now available! IMG is pleased to announce that a maintenance update for Linux is now available as My-T-Soft for Linux 2.20 R16 (Release 16) for the following platforms: i386 (32-bit) and AMD64 (64-bit). This updates the recent R14 release to add a few key features. Download available here These are an ongoing process to bring improvements, new features, and new platforms to the Build-A-Board run-time targets. The past several updates have been internal, focusing on the Linux version working on a headless server so the web based Build-A-Board (not yet public) can generate KBF files, and create the layout image. This layout image can then be seen as the actual run-time visual representation of the target system layout visible to the user. Because the ability to display the high-resolution images was limited on Linux, full support for the 3D HiRes default key, and the open-ended Key Images is now fully supported for 64-bit targets. The 32-bit Linux target now matches the 64-bit release - the R14 had a few memory issues that affected image operation in the 32-bit build. Several minor memory issues were identified & resolved. The R16 release includes updates to support the LKBF (Load KBF) command (e.g. [CMD:LKBF=NewLayout.KBF]. The Load KBF option provides an optional positioninfo indicator, which gives new layouts more flexibility in creating a robust user interface, and controlling the visual display of the layouts in use. As a reference, the following outlines the LKBF position information options now available in the Linux run-time targets: The technical updates of the past 2 releases include better handling for PNG images with scaling and improved speed. All rendered images are held in memory, so once all key aspects are properly rendered, there is no delay in displaying key changes (up/down/shift/Caps/etc.). We also have matched the Android versioning in the sense that all public releases will be even numbers, while odd numbers will be "under development" for internal purposes. About IMG Since 1995, Innovation Management Group has been the primary supplier of onscreen keyboard user interfaces and designer utilities to major corporations, manufacturers, integrators, and users worldwide. IMG's products run 24 hours a day, 7 days a week, on some of the most secure, advanced, and critical systems in the world. The My-T-Soft® Family along with IMG's My-T-Soft Build-A-Board Keyboard Designer offers a consistent cross-platform onscreen user interface that is fully customizable and programmable for various hardware / software platforms. It allows customers to control user input in any field or any application and maintain a higher level of security than with a traditional physical keyboard or membrane panel. The My-T-Soft product family is ideal for use in environments such as automation, field service, food and beverage, instrumentation, in-vehicle, kiosk, laboratory, logistic, medical, military, mobile, pharmaceutical, point-of-sale, ruggedized, utility, warehousing, whiteboard, or other extremely clean, dirty, or hazardous interactive user environment.
written August 10, 2022 by Kermit Komm
Category: Development Tags: My-T-Soft; Linux; #99
LKBF Notes:
If no [,positioninfo] is provided, the KBF will open based on its embedded top/left position.
The following positioninfo values will exist:
top - the top / center will be the anchor point
bottom - the bottom / center will be the anchor point
left - the left / center will be the anchor point
right - the right / center will be the anchor point
toplft - the top / left corner will be the anchor point
toprgt - the top / right corner will be the anchor point
botlft - the bottom / left corner will be the anchor point
botrgt - the bottom / right corner will be the anchor point
scrntl - will position on the screen top / left
scrntc - will position on the screen top / center
scrntr - will position on the screen top / right
scrnml - will position on the screen middle / left
scrnmc - will position on the screen middle / center
scrnmr - will position on the screen middle / right
scrnbl - will position on the screen bottom / left
scrnbc - will position on the screen bottom / center
scrnbr - will position on the screen bottom / right
overlay - will overlay the existing window (layouts should be same size)
For example, [CMD:LKBF=TEST.KBF,right] will effectively open the new layout with the right-most edge anchored, giving the illusion that it extends the panel outwards to the left (assuming TEST is larger than than the showing layout).
IMG is pleased to announce that My-T-Soft® 1.90 Release 5 is now available The My-T-Soft® 1.90 Release 5 adds a few new important features, addresses the Windows 11 roll-out, as well as providing a maintenance release. The IMG license manager includes support for Build-A-Board.com Account based licenses and now provides a mechanism to enter license credentials prior to license authentication, which creates additional license flexibility when deploying My-T-Soft on Windows platforms. Utilizing an ACCOUNT.TXT file, license credentials can be added to a system without the need for human interaction. With the AUTOLICENSE option, a license can be retrieved from the account using the embedded license credentials, so a system can be licensed without the need for human interaction. This provides a seamless way to deploy or configure a system via script, where installation and licensing can be performed automatically, resulting in a clean and easy way to roll out multiple systems.
In addition to the new features, all known issues have been addressed as part of this maintenance update For those new to My-T-Soft, and for a full breakdown of all the details of the 1.90 release, please see the original notes from the original release: IMG is pleased to announce that My-T-Soft® 1.90 is now available
In addition to the software release, the IMG Developer's Kit 1.90 is now available publicly for the first time. This includes various updates, and 64-bit builds with code-signed executables of the critical Developer Kit utilities. While previously available to IMG customers, this is now publicly available in the Developer's Corner. For developers and integrators, it provides a wealth of possible solutions to the user interface needs of sophisticated systems. By integrating a flexible on-screen keyboard solution (driven by an application's (or user's) needs), a comprehensive, secure user interface can be built.
To review, work with, or check out the My-T-Soft 1.90 release, you can download it here
written May 31, 2022 by Kermit Komm
Category: PR Tags: My-T-Soft 1.90 Release 5 #98
The Magnifier support - software vs. hardware Below is from a recent case regarding The Magnifier. Due to the nature of the software, reliance on the underlying magnification API, and the need for the system's physical video throughput to sustain and keep up with constant visual updates, sometimes the software simply can't perform on a lower-end system. Because the underlying problem is hardware based, there is nothing we can do from a support standpoint. We do have this tech link that outlines some issues and possible solutions for an existing system, sometimes the only solution is to upgrade the video capabilities. This case outlines how the problem with The Magnifier was resolved.
written January 10, 2022 by Alex S.
Category: Development Tags: The Magnifier; Support; Video #97
Windows 10 - 32 bit - Intel Q35 display adapter
Case open Message:
Screen flashes when the magnifier is set to full screen. When the Intel Q35 display adapter is disabled The Magnifier works as it should but there is screen distortion because of resolution issues without the functioning Intel Q35 adapter. I don't think The Magnifier is compatible with the Intel Q35 display adapter on a 32 bit system. I purchased license but not happy with the functioning of the product. Screen flicker on full screen very distracting. Is there any way to fix this issue? Please advise.
IMG Response:
What you are describing has to do with the video driver or capabilities of your video subsystem. This tech item http://www.imgpresents.com/imgfaq.htm?keyword=IU2111120673 provides some options - depending on settings, the amount of video memory used (& system speed/video throughput) can be drastically different. Also actual video driver.
Message:
Do you think an upgrade video graphics card would help?
IMG Response:
Yes, almost without a doubt. Almost every issue with the Magnifier has to do with video throughput. Although there are various factors, comparing video memory on the video card is a pretty good gauge to how powerful it is. If this is a motherboard based video, most of these systems are aimed at office use, not super strong with video capabilities.
Message:
Yes, this is an onboard Dell Optiplex 755 motherboard based video system. I'll try installing an upgrade video graphics card. I've already tried an NVIDIA graphics card and it stopped the flickering problem but was incompatible with the operating system in other regards and I'm sending it back. Next I'll try A Dell based graphics card designed for the Optiplex 755 operating system. Thanks for your time and trouble. My mother is practically blind from retinal issues at 94 and likes using The Magnifier to see email and internet. I've disabled the onboard Intel graphics device and The Magnifier works as it should but having issues with screen resolution elsewhere. Need to install a graphic card that works.
IMG Response:
Thanks for understanding the situation. We sometimes have people that want the software to solve a hardware problem. It is appreciated that you grasp the real issue.
Message:
Just to let you know. I installed an upgrade video graphics card and The Magnifier now works perfectly. I purchased an ATI Radeon HD 2400 Full Profile Graphics Adapter card on eBay. Works good on Dell Optiplex 755 32 bit computer. All is well. Thanks for your help.
View Current
View Company News
View Technical
View All
My-T-Soft and Assistive Technology Suite updates
February 19, 2025
Tracy Chang
Category: PR
Tags: My-T-Soft; Build-A-Board; Assistive Technology; Accessibility Suite
License Updates for 2024
June 28, 2024
Kermit Komm
Category: Development
Tags: SmartClick; OnScreen; The Magnifier; Joystick-to-Mouse;
My-T-Soft for Linux 2.20 Release 22 now available!
November 17, 2023
Kermit Komm
Category: Development
Tags: My-T-Soft; Linux;
Major National Trucking Company uses My-T-Soft® on thousands of tablets
July 28, 2023
Tracy Chang
Category: PR
Tags: My-T-Soft; Build-A-Board;
25+ Years of Innovations in On-Screen Keyboard Interface, How IMG Ensures Security and Productivity Across Industries
January 19, 2023
Tracy Chang
Category: PR
Tags: My-T-Soft; Build-A-Board; Security; Productivity;
Major National Retailer uses My-T-Soft® to bridge user interface from Windows to Linux
December 28, 2022
Tracy Chang
Category: PR
Tags: My-T-Soft; Build-A-Board; Linux;
My-T-Soft® updates rolled into GE Digital iFIX 6.1
November 28, 2022
Tracy Chang
Category: PR
Tags: My-T-Soft 1.90 Release 5; iFIX
Build-A-Board 2.20 Release 7 & My-T-Soft Basic 2.20 Release 12
August 26, 2022
Kermit Komm
Category: Development
Tags: My-T-Soft; My-T-Soft Basic; Build-A-Board
My-T-Soft for Linux 2.20 Release 16 now available!
August 10, 2022
Kermit Komm
Category: Development
Tags: My-T-Soft; Linux;
IMG is pleased to announce that My-T-Soft® 1.90 Release 5 is now available
May 31, 2022
Kermit Komm
Category: PR
Tags: My-T-Soft 1.90 Release 5
The Magnifier support - software vs. hardware
January 10, 2022
Alex S.
Category: Development
Tags: The Magnifier; Support; Video
Archives
|
|
As seen in ...
